Bluetooth Firmware For K6 Windows Version (ANSI US Layout)

Attention: This OTA Bluetooth Firmware Tool Tutorial is only for K6 keyboard (Only applied to Keyboard Windows option and keyboard wireless bluetooth mode).

The keyboard bluetooth firmware can be used in all K6 keyboard versions ( Such as Hot swappable / White backlight / RGB backlight)

Note: If everything works fine with your keyboard. Please don’t update the Bluetooth firmware. There is a chance it can damage your keyboard.


1. Download the File (Make sure to save them in the desktop and select the correct Bluetooth firmware.)

OTA Tool

K6 Wins version keyboard Bluetooth firmware for Gateron mechanical switch (ANSI US).hex

K6 Wins version keyboard Bluetooth firmware for LK Optical switch (ANSI US).hex

K6 Wins version non-backlight keyboard Bluetooth firmware (ANSI US).hex

2. Switch the toggle to the Bluetooth mode and connect the K6 to your device. (Make sure K6 has enough battery.)

3.  Unzip the OTA Tool file and click the "Setting" section.

4. Edit the PID code: ProductID for K6 ANSI (US) layout is 024F. Then save the file after you edited the PID code. 

5. Open the first file "Bluetooth HID Firmware Upgrade V2.0 Beta3" and start the wireless programming process. 

6. Click the "Browse" option and choose the "⁣K6 Wins version keyboard bluetooth firmware (ANSI US).hex" file. (Make sure the "HEX" format file is saved on the desktop.)

7. If the file shows "No Connection!" then it means the PID code does not match the program. 

8.  Then click the "Upgrade" option and start downloading the OTA tool. Then test the keyboard.

9. If your K6 keyboard cannot work after downloading the QTA tool, then try to close the file and reconnect your K6 keyboard. 

10. Reset your K6 keyboard. (Press the Fn+J+Z for 4 seconds)

11. Delete and disconnect the keyboard from your computer.

12. Try to connect the keyboard to your computer again and it should be fine. If not, then repeat step 11.